Version 1.5
FB2510 Series User’s Quick Setting
Page 1/3
©2001-2003 FabiaTech Corp.
1. Brief
The FB2510 is an all-in-one, PC/104, NS Geode low power CPU module. This user’s quick setting
provides the jumper settings, connector location, and their pin assignment.
2. Board Placement
CN3
CN9
CN6
J5
J4
JP1
CN7
BUS1
CN5
CN1
J3
CN2
J6
CN8
CN4
J1
J2
LED1
J7
3. Packing
List
1 FB2510x all-in-one PC/104 CPU board.
1 VGA (CRT interface) adapter cable.
1 44-pin hard disk drive interface cable.
1 20-pin to 34-pin floppy drive interface cable.
2 serial port adapter cable and 1 parallel port interface cable.
1 PS/2 keyboard and mouse port adapter cable.
1 USB adapter cable. (Optional)
1 10-pin LAN adapter cable with FB4605A transfer board.
1 compact disc includes software utility.
1 hard copies of this quick setup manual.
4. Features
*
On-board 200~300 MHz NS Geode GX1 CPU.
*
NS CS5530A chipset with UMA architecture.
*
1 So-DIMM socket for up to 128MB PC-100 SDRAM.
*
One 100/10 base-T Ethernet port.
*
Provides CRT and LCD with 1.5MB to 4MB shared memory.
*
1 parallel port, 2 RS-232, 1 floppy port and 1 PCI IDE interface.
*
PS/2 compatible keyboard and mouse interface.
*
Provides header for external speaker and hard disk access LED.
*
Flash BIOS with easy upgrade utility.
*
2 USB ports and software programmable watchdog timer.
*
Power re5V only, 1.2A maximum.
*
PC/104 form factor, 90.2 mm x 95.9 mm (3.55” x 3.775”)
5. Connectors, Headers and Their Relative Jumpers
A. Reset
Header
(
J5
)
J5 is a 2-pin header for connecting to system reset bottom. Close these 2 pins to hardware reset
FB2510 and restart system booting.
B. Power Connector (
J4
: 4-pin 2.5mm JST)
C. Keyboard and Mouse Connector (
CN9
)
CN9 provides PS/2 keyboard and mouse interface, use the included adapter cable to connect
between CN9 and standard PS/2 device.
D. IDE Hard Disk Connector and Access LED Header (
CN4
and
J7
)
Use 44-pin hard disk cable you can attach up to two 2.5” hard disk drives.
Pin 1: Mouse Data
Pin 2: Keyboard Data
Pin 3: Ground
Pin 4: +5V
Pin 5: Mouse Clock
Pin 6: Keyboard Clock
6
1
CN9
J4
Pin 1: +5V
Pin 2: Ground
Pin 3: Ground
Pin 4: +12V
1
4
Note: FB2510 needs +5V only,
+12V is not necessary.
1
2
J7
Pin 1: LED+
Pin 2: LED-
