background image

PRE

LIM

INA

RY

Networked PIP Series Reference Manual

PIP - LITE

PIP - USP4-CN

PIP - BLU

Network Programmable Input Processors with HiQnet™, TCP/IQ™, 

SmartAmp™Features, Load Supervision for Crown PIP2™-Compatible 

Amplifiers, PIP-BLU™, and CobraNet™ Connectivity (USP4-CN only)

Obtaining Other Language Versions:

 To obtain information in another language 

about the use of this product, please contact your local Crown Distributor. If you need 

assistance locating your local distributor, please contact Crown at 574-294-8000.

This manual does not include all of the details of design, production, or variations of the 

equipment. Nor does it cover every possible situation which may arise during installation, 

operation or maintenance. If special assistance is needed beyond the scope of this manual, 

or the software online help, please contact the Crown Technical Support Group.

The information provided in this manual was deemed accurate as of the publication date. 

However, updates to this information may have occurred. To obtain the latest version of this 

manual, please visit the Crown website at www.crownaudio.com.

Trademark Notice:

 Crown, Crown Audio, Amcron, Com-Tech, Macro-Tech, IQ and IQ 

System are registered trademarks of Crown International. TCP/IQ, SmartAmp, IQ2, PIP, 

PIP-BLU and PIP2 are trademarks of Crown International. HiQnet is a trademark of Harman 

International Industries, Inc. Other trademarks are the property of their respective owners.

Some models may be exported under the name Amcron

®

©2012 by Harman International. 1718 W. Mishawaka Rd., Elkhart, Indiana 46517-9439 

U.S.A. Telephone: 574-294-8000.

5014379  04/12

www.audiovias.com

Summary of Contents for crown PIP Series

















Reviews: