Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
Chapter 6 IP Routing Policy Configuration Commands
Huawei Technologies Proprietary
6-6
Description
Using
apply local-preference
command, you can configure to apply the local
preference of route information. This command is one apply sub-statements of
Route-policy attribute set. Using
undo apply local-preference
command, you can
cancel the apply sub-statement.
For the related commands, see
if-match interface
,
if-match acl
,
if-match ip-prefix
,
if-match ip next-hop
,
if-match cost
,
if-match tag
,
route-policy
,
apply ip next-hop
,
apply local-preference
,
apply origin
and
apply tag
.
Example
# Apply the local preference level of route information as 130 when this apply
sub-statement is used for setting route information attribute. .
[Quidway-route-policy] apply local-preference 130
6.1.8 apply origin
Syntax
apply origin
{
igp
|
egp
as-number
|
incomplete
}
undo apply origin
View
Route policy view
Parameter
igp
: Set the BGP route information source as internal route
egp
: Set the BGP route information source as external route
as-number
: Specifies AS number of external route.
incomplete
: Setting the BGP route information source as unknown source.
Description
Using
apply origin
command, which is one of attribute apply sub-statements of
Route-policy, you can configure to apply the route source. Using
undo apply origin
command, you can cancel the apply sub-statement.
For the related commands, see
if-match interface
,
if-match acl
,
if-match ip-prefix
,
if-match ip next-hop
,
if-match cost
,
if-match tag
,
route-policy
,
apply ip next-hop
,
apply local-preference
,
apply cost
and
apply tag
.
Example
# Define one apply sub-statement. When it is used for setting route information attribute,
it sets the route source of BGP route information as igp.
