Operation Manual – MSTP
Quidway S3100 Series Ethernet Switches
Chapter 1 MSTP Configuration
Huawei Technologies Proprietary
1-25
Operation
Description
Related section
MSTP operation
mode
configuration
Optional
Section
Timeout time
factor
configuration
Optional
Section 1.2.9 “Timeout Time
Factor Configuration”
Maximum
transmitting
speed
configuration
Optional
The default is recommended.
Section 1.2.10 “Maximum
Transmitting Speed
Configuration”
Edge port
configuration
Optional
Section 1.2.11 “Edge Port
Configuration”
Path cost
configuration
Optional
Section 1.3.7 “Path Cost
Configuration”
Port priority
configuration
Optional
Section 1.3.8 “Port Priority
Configuration”
Point-to-point
link related
configuration
Optional
Section 1.2.12 “Point-to-point
Link-Related Configuration”
Note:
In a network that contains switches with both GVRP and MSTP employed, GVRP
packets are forwarded along the CIST. If you want to broadcast packets of a specific
VLAN through GVRP, be sure to map the VLAN to the CIST when configuring the
MSTP VLAN mapping table (The CIST of a network is the spanning tree instance
numbered 0.)
1.3.1 Prerequisites
The status of the switches in the spanning trees is determined. That is, the status (root,
branch, or leaf) of each switch in each spanning tree instance is determined.
1.3.2 MST Region Configuration
Refer to section 1.2.2 “MST Region Configuration”.
1.3.3 MSTP Operation Mode Configuration
Refer to section 1.2.5 "MSTP Operation Mode Configuration".