Huawei Quidway S3100 Series Operation Manual Download Page 214

Page: 214 / 514

Operation Manual – 802.1x
Quidway S3100 Series Ethernet Switches

Chapter 1 802.1x Configuration

Huawei Technologies Proprietary

1-12

Note:

The client-version-checking function needs the support of Huawei’s 802.1x client

program.

III. The Guest VLAN function

The Guest VLAN function enables supplicant systems that do not pass the

authentication to access a LAN in a restrained way.

With the Guest VLAN function enabled, supplicant systems that do not have 802.1x

client installed can access specific network resources. They can also upgrade their

802.1x clients without being authenticated.

With this function enabled:

The switch broadcasts active authentication packets to all 802.1x-enabled ports.

After the maximum number of authentication retries have been made and there

are still ports that have not sent any response back, the switch will then add these

ports into the Guest VLAN.

When the maximum number of authentication retries is reached, the switch adds

the ports that do not return response packets to Guest VLAN.

Users belonging to the Guest VLAN can access the resources of the Guest VLAN

without being authenticated. But they need to be authenticated before accessing

external resources.

Normally, the Guest VLAN function is coupled with the dynamic VLAN delivery function.

1.2 802.1x Configuration

802.1x provides a solution for authenticating users. To implement this solution, you

need to execute 802.1x-related commands. You also need to configure AAA schemes

on switches and to specify the authentication scheme (RADIUS authentication scheme

or local authentication scheme).

ISP domain

configurati on

AAA sc he

Local

aut henticati on

RADIUS

scheme

802.1x

configurati on

ISP domain

configurati on

AAA sc he

Local

aut henticati on

RADIUS

scheme

802.1x

configurati on

Figure 1-10

802.1x configuration

802.1x users use domain names to associate with the ISP domains configured on

switches

Configure the AAA scheme (a local authentication scheme or the RADIUS scheme)

to be adopted in the ISP domain.

Summary of Contents for Quidway S3100 Series



































































































































































































































































































































































































































































































































Search results

Summary of Contents for Quidway S3100 Series

Reviews:

Related manuals for Quidway S3100 Series

Brands by name

Popular brands

Huawei Quidway S3100 Series, Operation Manual

Search results

Summary of Contents for Quidway S3100 Series

Reviews:

Related manuals for Quidway S3100 Series

Brands by name

Popular brands