Operation Manual – AAA&RADIUS
Quidway S3100 Series Ethernet Switches
Chapter 1 AAA&RADIUS Configuration
Huawei Technologies Proprietary
1-16
Operation
Command
Description
Set a password for the
specified user
password
{
simple
|
cipher
}
password
Optional
Set the password display
mode of all local users
local-user
password-display-m
ode
{
cipher-force
|
auto
}
Optional
By default, the password
display mode of all access
users is
auto
, indicating the
passwords of access users
are displayed in the modes
set with the
password
command.
Set the state of the
specified user
state
{
active
|
block
}
Optional
By default, the local users
are in the
active
state once
they are created, that is,
they are allowed to request
network services.
Authorize the user to
access the specified
type(s) of service(s)
service-type
{
ftp
|
lan-access
|
{
telnet
|
ssh
|
terminal
}*
[
level level
] }
Required
By default, the system does
not authorize the user to
access any service.
Set the priority level of the
user
level level
Optional
By default, the priority level
of the user is 0.
Set the attributes of the
user whose service type is
lan-access
attribute
{
ip
ip-address
|
mac
mac-address
|
idle-cut
second
|
access-limit
max-user-number
|
vlan vlan-id
|
location
{
nas-ip ip-address
port
port-number
|
port port-number
} }*
Optional
If the user is bound to a
remote port, you must
specify the
nas-ip
parameter (the following
ip-address
is 127.0.0.1 by
default, representing this
device). If the user is bound
to a local port, you do not
need to specify the
nas-ip
parameter.
