Huawei Quidway S3100 Series Operation Manual Download Page 125

Page: 125 / 514

Operation Manual – Port
Quidway S3100 Series Ethernet Switches

Chapter 1 Basic Port Configuration

Huawei Technologies Proprietary

1-3

Table 1-2

Processing of incoming/outgoing packets

Processing of an incoming packet

Port
type

If the

packet

does not

carry a

VLAN tag

If the packet carries a

VLAN tag

Processing of an

outgoing packet

Access

If the VLAN ID is just the
default VLAN ID, receive
the packet.

If the VLAN ID is not the
default VLAN ID, discard
the packet.

Deprive the tag from the
packet and send the packet.

Trunk

If the VLAN ID is just the
default VLAN ID, deprive
the tag and send the
packet.

If the VLAN ID is not the
default VLAN ID, keep
the original tag
unchanged and send the
packet.

Hybrid

Receive
the packet
and add
the default
tag to the
packet.

If the VLAN ID is just the
default VLAN ID, receive
the packet.

If the VLAN ID is not the
default VLAN ID but is
one of the VLAN IDs
allowed to pass through
the port, receive the
packet.

If the VLAN ID is neither
the default VLAN ID, nor
one of the VLAN IDs
allowed to pass through
the port, discard the
packet.

If the VLAN ID is just the
default VLAN ID, deprive
the tag and send the
packet.

If the VLAN ID is not the
default VLAN ID, deprive
the tag or keep the tag
unchanged (whichever
is done is determined by
the

port hybrid vlan

vlan-id-list

{

tagged

untagged

} command)

and send the packet.

Caution:

To guarantee the proper packet forwarding, the default VLAN ID of the local hybrid port

or trunk port should be identical with that of the hybrid port or trunk port on the peer

switch.

Summary of Contents for Quidway S3100 Series



































































































































































































































































































































































































































































































































Search results

Summary of Contents for Quidway S3100 Series

Reviews:

Related manuals for Quidway S3100 Series

Brands by name

Popular brands

Huawei Quidway S3100 Series, Operation Manual

Search results

Summary of Contents for Quidway S3100 Series

Reviews:

Related manuals for Quidway S3100 Series

Brands by name

Popular brands