Operation Manual – CLI
Quidway S3100 Series Ethernet Switches
Chapter 1 CLI Overview
Huawei Technologies Proprietary
1-3
1.2.2 Configuring the Level of a Specific Command in a Specific View
You can configure the level of a specific command in a specific view. Commands fall
into four command levels: visit, monitor, system, and manage, which are identified as 0,
1, 2, and 3 respectively. The administrator can change the command level a command
belongs to.
Table 1-3 lists the operations to configure the level of a specific command.
Table 1-3
Configure the level of a specific command in a specific view
Operation
Command
Description
Enter system view
system-view
—
Configure the level of
a specific command
in a specific view
command-privilege
level
level
view
view
command
Required
Use this command with caution to
prevent inconvenience on
maintenance and operation.
1.2.3 CLI Views
CLI views are designed for different configuration tasks. They are interrelated. You will
enter user view once you log into a switch successfully, where you can perform
operations such as displaying operation status and statistical information. And by
executing the
system-view
command, you can enter system view, where you can
enter other views by executing the corresponding commands.
The following CLI views are provided:
z
User view
z
System view
z
Ethernet port view
z
VLAN view
z
VLAN interface view
z
LoopBack interface view
z
Local user view
z
User interface view
z
FTP client view
z
SFTP client view
z
MST region view
z
Cluster view
z
Public key view
z
Public key editing view
z
Basic ACL view
z
Advanced ACL view
z
RADIUS scheme view
