Huawei Quidway S3100 Series Operation Manual Download Page 441

Page: 441 / 514

Operation Manual – File System Management
Quidway S3100 Series Ethernet Switches

Chapter 1 File System Management

Huawei Technologies Proprietary

1-8

If you execute this command with the

safely

keyword specified, the system saves

the current configuration in the safe mode. Although this mode takes more time

than the fast mode, the configuration can be saved to the Flash even if the switch

restarts or is powered off when the saving operation is being processed.

The fast mode is recommended under the circumstances where the power systems are

reliable, while the safe mode is recommended when power system is unreliable or you

are performing a remote maintenance operation.

Note:

If you execute the

save

command with the

cfgfile

argument not specified, the

current configuration is saved in the configuration file with which the switch latest

starts. If the switch starts using the default configuration, the current configuration is

saved in the default configuration file.

To make a switch to adopt the current configuration when it starts the next time,

save the current configuration using the

save

command before restarting the

switch.

1.2.5 Storage Device Operations

With the file system, you can format a storage device. Note that the format operation

leads to the loss of all files on the storage device and is irretrievable.

Perform the following operation in user view.

Table 1-5

Operations on storage device

Operation

Command

Description

Format the storage device

format

device

Required

1.2.6 Prompt Mode Configuration

Table 1-6 lists the operations to configure the prompt mode of the current file system.

Table 1-6

Configuration on prompt mode of file system

Operation

Command

Description

Enter system view

system-view

—

Summary of Contents for Quidway S3100 Series



































































































































































































































































































































































































































































































































Search results

Summary of Contents for Quidway S3100 Series

Reviews:

Related manuals for Quidway S3100 Series

Brands by name

Popular brands

Huawei Quidway S3100 Series, Operation Manual

Search results

Summary of Contents for Quidway S3100 Series

Reviews:

Related manuals for Quidway S3100 Series

Brands by name

Popular brands