Operation Manual – Port
Quidway S3100 Series Ethernet Switches
Chapter 1 Basic Port Configuration
Huawei Technologies Proprietary
1-4
1.1.4 Adding an Ethernet Port to Specified VLANs
You can add the specified Ethernet port to a specified VLAN. After that, the Ethernet
port can forward the packets of the specified VLAN, so that the VLAN on this switch can
intercommunicate with the same VLAN on the peer switch.
An access port can only be added to one VLAN, while hybrid and trunk ports can be
added to multiple VLANs.
Note that the port shall be added to an existing VLAN.
1.2 Configuring Ethernet Ports
1.2.1 Making Basic Port Configuration
Table 1-3
Make basic port configuration
Operation
Command
Remarks
Enter system view
system-view
—
Enter Ethernet port
view
interface
interface-type
interface-number
—
Enable the Ethernet
port
undo shutdown
By default, the port is
enabled.
Use the
shutdown
command to disable the
port.
Set the description of
the Ethernet port
description
text
By default, no
description is defined
for an Ethernet port.
Set the duplex mode of
the Ethernet port
duplex
{
auto
|
full
|
half
}
The port defaults to
auto
(autonegotiation)
mode.
Set the rate of the
Ethernet port
speed
{
10
|
100
|
1000
|
auto
}
By default, the speed of
the port is set to
auto
mode.
Set the MDI attribute of
the Ethernet port
mdi
{
across
|
auto
|
normal
}
Be default, the MDI
attribute of the port is
set to
auto
mode.
Note:
The
mdi
command is not available on the Ethernet ports of the expansion interface
card.
