Figure 4-2
Diagram of central backup and disaster recovery
Site B
Primary
storage system
Site A
Switch
Maintenance
terminal
Management
network port
Controller A
host port P0
Controller B
host port P0
Application
server 1
Standby
server
Secondary
storage system
Switch
Maintenance
terminal
Management
network port
Controller A
host port P0
Site C
Controller B
host port P0
To achieve data backup to the central backup site, an iSCSI connection between site A and
site B must be set up first, and then a logical connection needs to be established by adding a
route and a target. Before setting up the connections, a detailed networking plan must be
drawn.
describes the IP address plan for site B.
Table 4-5
IP address plan for site B
Port
IP Address
Subnet Mask
Gateway
Management network
port
192.168.19.10
255.255.0.0
192.168.0.1
Host port P0 on
controller A
172.17.20.31
255.255.0.0
172.17.0.1
Host port P0 on
controller B
172.17.20.32
255.255.0.0
172.17.0.1
Service Planning
Based on the conclusion of the requirement analysis, a central disaster backup solution can
meet the requirements of the carrier.
shows the configuration roadmap of the
solution.
OceanStor V3 Series
Remote Replication Feature Guide for Block
4 Configuration Example
Issue 06 (2018-01-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
76