Huawei OceanStor 18500 V3 Features Manual Download

Page: 162 / 183

Step 3

Remove a remote link.

NOTICE

If authentication fails, follow instructions in

Changing Authentication Information

modify authentication information.

Select a remote device from which you want to remove a remote link.

In the lower function pane, click the

FC Link

iSCSI Link

tab.

Select the remote link you want to remove and click

Remove

The security alert dialog box is displayed.

NOTE

You can also right-click it and choose

Remove

Step 4

Confirm the removing of the remote link.

Confirm the information in the dialog box and select

I have read and understand the

consequences associated with performing this operation.

Click

The

Success

message box is displayed, indicating that the operation succeeded.

Click

----End

8.5 Removing a Remote Device

This operation enables you to remove unwanted remote storage devices.

Prerequisites

A remote device exists in the system and the remote device does not run the inter-array
remote replication, LUN copy, or clone service.

Procedure

Step 1

Step 2

Choose

Data Protection

Remote Device

Step 3

Select the remote device you want to remove and click

Remove

on the menu bar. You can

also right-click the remote device that you want remove, and choose

Remove

The security alert dialog box is displayed.

OceanStor V3 Series
Remote Replication Feature Guide for Block

8 Managing Remote Devices

Issue 06 (2018-01-30)

Huawei Proprietary and Confidential

154

Summary of Contents for OceanStor 18500 V3
























































































































































































Search results

Summary of Contents for OceanStor 18500 V3

Reviews:

Related manuals for OceanStor 18500 V3

Brands by name

Popular brands

Huawei OceanStor 18500 V3, Features Manual

Search results

Summary of Contents for OceanStor 18500 V3

Reviews:

Related manuals for OceanStor 18500 V3

Brands by name

Popular brands