Huawei NetCol5000-C User Manual Download Page 79

Page: 79 / 219

NetCol5000-C(065, 080) In-row Chilled Water Smart
Cooling Product
User Manual

4 Commissioning

Issue 07 (2020-03-16)

No.

Items

Note

The current minor alarm
and their quantity (visible
for V200R002 version)

refers to the current major alarm and their

quantity.

The current warning alarm
and their quantity

refers to the current warning alarm and

their quantity.

The status bar

N/A

The alarm bar

You can tap

in the

alarm bar to enter the active alarm screen that
displays all active alarms.

indicates that you have not logged in

to the system, and can tap the icon to log in.

indicates that you have logged in to

the system as admin or operator user, and can tap the
icon to log out.

Teamwork control button

indicates that there is no teamwork control at

present.

indicates that there is teamwork

control without alarms at present.

indicates

that there is teamwork control with alarms at present.

4.3 Initial Configuration

4.3.1 Setting Temperature and Humidity Values and (Optional)
Enabling T/H Sensors

Prerequisites



The T/H sensors outside the cabinet need to be enabled when they are installed,
otherwise, skip

Step 2



If you need to enable a humidity and temperature sensor, log in as the

admin

user.



This section describes how to enable

Cold aisle sensor 1

Procedure

Step 1

On the home screen, choose

Settings

System Settings

T/H sensor

Figure 4-4

displayed.

Summary of Contents for NetCol5000-C




























































































































































































































Search results

Summary of Contents for NetCol5000-C

Reviews:

Related manuals for NetCol5000-C

Brands by name

Popular brands

Huawei NetCol5000-C, User Manual

Search results

Summary of Contents for NetCol5000-C

Reviews:

Related manuals for NetCol5000-C

Brands by name

Popular brands