Huawei iBattery 3.0 User Manual Download Page 4

Page: 4 / 89

iBattery 3.0
User Manual

About This Document

Issue 07 (2019-12-30)

iii

Symbol

Description

personal injury.

Supplements the important information in the main text.

NOTE is used to address information not related to
personal injury, equipment damage, and environment
deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all
updates made in previous issues.

Issue 07 (2019-12-30)

Added the WebUI description.

Issue 06 (2019-11-22)

Added the iBOX feature description.

Issue 05 (2019-07-02)

Added description of how to connect a cable to the new BIB board.

Issue 04 (2019-04-29)

Updated the section "iBAT Networking Failure."

Issue 03 (2019-01-02)

Update iBOX WebUI.

Issue 02 (2018-05-10)

Added the scenario where the iBOX connects to the ECC800.

Issue 01 (2018-03-20)

This issue is the first official release.

Summary of Contents for iBattery 3.0


























































































Search results

Summary of Contents for iBattery 3.0

Reviews:

Related manuals for iBattery 3.0

Brands by name

Popular brands

Huawei iBattery 3.0, User Manual

Search results

Summary of Contents for iBattery 3.0

Reviews:

Related manuals for iBattery 3.0

Brands by name

Popular brands