iBattery 3.0
User Manual
5 System Commissioning
Issue 07 (2019-12-30)
Copyright © Huawei Technologies Co., Ltd.
62
Switching iBAT Numbers
Figure 5-26
Switching iBAT numbers
Switch No.1
: Indicates the switching number 1 corresponding to the operation type
Switch
iBAT No
.
Switch No.2
: Indicates the switching number 2 corresponding to the operation type
Switch
iBAT No
.
Example: There are three iBATs in the network and they are numbered 1, 2, and 3. Choose
Switch iBAT No.
, set
Switch No.1
to 2, and set
Switch No.2
to 3. After the operation, the
iBAT numbers 2 and 3 are switched.
Figure 5-27
Schematic diagram
5.7 Setting iBAT Blinking
On the iBOX WebUI, choose
Monitoring > iBOX System > Running Control > iBAT
Blink Control
to control iBAT blinking.
Blink in sequence
:
−
When the
Start No.
and the
End No.
are the same, the iBAT of this number will
blink.
−
When the
Start No.
and the
End No.
are different, the iBATs from the
Start No.
to
the
End No.
will blink in sequence.
Blink concurrently
: The
Start No.
and the
End No.
do not need to be entered. All
iBATs under the iBOX will blink at the same time.
Stop All Blinking
: The
Start No.
and the
End No.
do not need to be entered. All iBATs
under the iBOX will stop blinking at the same time.
The iBAT starts blinking after the time specified by
Switch on delay time
. If
Switch on
delay time
is set to
0
, the iBAT starts blinking immediately.
