iBattery 3.0
User Manual
5 System Commissioning
Issue 07 (2019-12-30)
Copyright © Huawei Technologies Co., Ltd.
58
If the RF_Z indicator on the iBOX is not steady green, hold down the networking switch
on the iBOX for 10–20 seconds to clear the original network.
If the RUN/ALM indicator on the iBAT is not steady red, hold down the networking
switch on the iBAT for at least 5 seconds to clear the original network.
For parallel networking, multiple personnel can collect iBAT SN information at the same
time.
The sequence of collecting iBAT SN information needs to be the same as that of battery
numbers.
Procedure
Step 1
Open the
Service Expert
app and go to the homepage. Select
Stock
to access the
Stock
page.
Step 2
Click
+
in the upper right corner and choose
Ibat Collection
. On the
IBAT Scan
page, click
to collect iBAT SN info.
You can manually enter SN on the
Service Expert
app to collect the iBAT SN information.
Step 3
Click
Save
in the upper right corner. The collected information is saved in CSV format and
stored in the
BatteryAPP
path. Locate the doc that stores iBAT SN and upload it to the
computer.
Save the iBAT information file in CSV format.
It is recommended that the names of CSV files correspond to different iBOXs.
Step 4
Save sequence numbers of iBATs related to the same iBOX a CSV file according to the
battery sequence numbers.
Step 5
On the iBOX Web page, select
System Settings > Parallel Net Join Config
, and set
Parallel
Net Join Status
to
Enable
.
Set
Parallel Net Join Status
to
Enable
for all iBOX.
Ensure that the configured number of batteries is consistent with the number of scanned batteries.
Otherwise, the import fails.
Step 6
Perform
iBAT SN number import
to import the iBAT SN information to the corresponding
iBOX.
Do not operate the networking switch during networking. Otherwise, the networking fails.
You need to clear the network parameters for the iBOX, set
Parallel Net Join Status
to
Enable
, and separately press the networking switch for 2 seconds on the iBOX and on the
iBAT for which the network parameters have been cleared when the iBOX network
parameters are cleared, to complete the networking again.
