background image

Contents

About This Document.....................................................................................................................ii

1 Routine Maintenance Guide....................................................................................................... 1

1.1 Maintenance Precautions................................................................................................................................................1
1.1.1 Basic Maintenance Requirements............................................................................................................................... 1
1.1.2 Other Precautions........................................................................................................................................................ 2
1.2 Routine Maintenance Purpose and Item.........................................................................................................................3
1.3 Maintenance Tools..........................................................................................................................................................4
1.4 How to Obtain Huawei Technical Support.....................................................................................................................5

2 Common Alarm Handling........................................................................................................... 6

2.1 Alarm Severities and Description...................................................................................................................................6
2.2 Alarm Query................................................................................................................................................................... 6
2.3 Alarm Description and Handling....................................................................................................................................7
2.3.1 EDFA Optical Power Alarms...................................................................................................................................... 8
2.3.1.1 ALM-65536 EDFA Input Low Power Alarm...........................................................................................................8
2.3.1.2 ALM-65545 EDFA Input Los Power Alarm............................................................................................................ 9
2.3.1.3 ALM-65546 EDFA Input High Power Alarm........................................................................................................ 10
2.3.1.4 ALM-65537 EDFA Output Power Alarm.............................................................................................................. 11
2.3.2 EDFA Temperature Alarms....................................................................................................................................... 11
2.3.2.1 ALM-65538 EDFA High Temperature Alarm........................................................................................................12
2.3.2.2 ALM-65547 EDFA Super High Temperature Alarm............................................................................................. 12
2.3.3 EDFA PUMP Alarms................................................................................................................................................ 13
2.3.3.1 ALM-65539 EDFA Pump1 Current Alarm............................................................................................................ 13
2.3.3.2 ALM-65540 EDFA PUMP1 Temperature Alarm...................................................................................................14
2.3.3.3 ALM-65541 EDFA PUMP2 Current Alarm...........................................................................................................15
2.3.3.4 ALM-65542 EDFA PUMP2 Temperature Alarm...................................................................................................16
2.3.4 Fan Alarms................................................................................................................................................................ 17
2.3.4.1 ALM-4097 Fan Speed Alarm................................................................................................................................. 17
2.3.4.2 ALM-4098 Fan Temperature Alarm.......................................................................................................................18
2.3.5 Power Supply Alarms................................................................................................................................................19
2.3.5.1 ALM-4100 Power Supply Out of range Alarm...................................................................................................... 19
2.3.5.2 ALM-4106 Device Power Suppy Failure Alarm....................................................................................................20
2.3.6 Other Alarms............................................................................................................................................................. 21

EDFA0820-D
Routine Maintenance Guide

Contents

Issue 02 (2018-07-02)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

iv

Summary of Contents for EDFA0820-D















































Reviews: