Airbridge BTS3606E&3606AE
System Commissioning Guide
3 Commissioning Process
Issue 02 (2006-10-10)
Huawei Technologies Proprietary
3-29
z
Make a call from one MS to a PSTN subscriber and hook on after the conversation.
z
Make a call from a PSTN subscriber to one MS and hook on after the conversation.
Step 4
Check that all calls are successful.
Step 5
Check that the calls are normal and voice quality is good.
----End
3.6.4 Handoff Test
z
Soft handoff refers to a handoff between different cells operating at the same frequency. Softer
handoff refers to a handoff between different sectors operating at the same frequency and in the
same cell.
z
One cell may contain one or more sectors. This test is relevant when multiple sectors are planned.
The test procedure is as follows:
Step 1
Register two test CDMA MSs in the HLR.
Step 2
Power on the two MSs so that they are attached to the network and they switch to idle mode.
Step 3
Make a call in one sector to set up the conversation between the two MSs.
Step 4
Maintain the call and move one MS to the destination sector.
Step 5
Check that :
z
The call is maintained and stable.
z
Voice quality is good.
----End
3.6.5 Short Message Service Test
Ensure that the network is configured with a message center (MC).
The test procedure is as follows:
Step 1
Register two test MSs in the HLR.
Step 2
Power on the two MSs so that they are attached to the network and they switch to idle mode.
Step 3
Send a short message from MS A to MS B.
Step 4
Check that:
z
MS A displays a prompt that the short message is sent successfully.
z
The message can be queried on the MC.
z
MS B receives the message and displays the messages correctly.
----End
