Airbridge BTS3606E&3606AE
System Commissioning Guide
3 Commissioning Process
Issue 02 (2006-10-10)
Huawei Technologies Proprietary
3-11
Step 1
Use a crossover Ethernet cable to connect the Ethernet port of the WS and that of the BCKM.
Figure 3-6 shows the connection between the WS and the BCKM.
Figure 3-6
Connection between the WS and the BCKM
BTS
BCKM
Network
port
Crossover
Ethernet cable
Step 2
Click
Start
>
Run
.
Step 3
In the
Run
dialog box, execute the command
cmd
.
The Command window is displayed.
Step 4
In the Command window, execute the command
Ping xxx.xxx.xxx.xxx
to verify the
connectivity between the WS and the BTS.
Step 5
If the connection proves to be successful, execute the command
Telnet xxx.xxx.xxx.xxx
to
log in to the BTS.
The IP address of the BCKM Ethernet port is 172.16.16.16 by default.
If the computer fails to access the BCKM, the possible causes are as follows:
z
The crossover Ethernet cable is faulty.
z
The IP address of the WS is wrong.
----End
3.3.3 Configuring the IP Address and Routing Information of the
BTS
You need to carry out this task only when the BTS uses an FE link to bear the IP connection and when
the BTS is started for the first time.
Task Description
Configure the IP address and routing information of the BTS that uses IP over FE
transmission.
Prerequisites
z
The WS is in the same TCP/IP network as the BCKM.
z
The communication between the WS and the BCKM is normal.
