Huawei 196KTL-H0 User Manual Download Page 33

Page: 33 / 122

Figure 4-9 Installing the mounting bracket

NO TE

The M12x40 bolt assemblies are delivered with the SUN2000 (bound to the mounting

bracket). If the bolt assembly length does not meet the installation requirements, prepare

M12 bolt assemblies by yourself and use them together with the delivered M12 nuts.

----End

4.4.2 Wall-mounted Installation

Wall-mounted Installation

Step 1 Install the mounting bracket.

WARNING

Avoid drilling holes in the water pipes and power cables buried in the wall.

NO TICE

● To prevent dust inhalation or contact with eyes, wear safety goggles and an

anti-dust respirator when drilling holes.

● Clean up any dust in and around the holes using a vacuum cleaner and

measure the distance between holes. If the holes are inaccurately positioned,

drill a new set of holes.

● Level the head of the expansion sleeve with the concrete wall after removing

the bolt, spring washer, and flat washer. Otherwise, the mounting bracket will

not be securely installed on the wall.

SUN2000-(196KTL-H0, 200KTL-H2, 215KTL-H0)

Series

User Manual

4 Installation

Issue 07 (2021-07-08)

Summary of Contents for 196KTL-H0



























































































































Search results

Summary of Contents for 196KTL-H0

Reviews:

Related manuals for 196KTL-H0

Brands by name

Popular brands

Huawei 196KTL-H0, User Manual

Search results

Summary of Contents for 196KTL-H0

Reviews:

Related manuals for 196KTL-H0

Brands by name

Popular brands