Huawei 196KTL-H0 User Manual Download Page 60

Page: 60 / 122

Man-Machine Interactions

7.1 Operations with the App

7.1.1 App Introduction

Functions

●

The FusionSolar app is recommended when the SUN2000 is connected to the

FusionSolar hosting cloud. The SUN2000 app is recommended when the

SUN2000 is connected to other management systems.

●

The SUN2000 or FusionSolar app (app for short) is a mobile phone app that

communicates with the SUN2000 over a WLAN/Bluetooth module or a USB

data cable to allow for querying alarms, setting parameters, and performing

routine maintenance as an easy-to-use maintenance platform.

Connection Mode

After the DC or AC side of the SUN2000 is powered on, you can connect the app

to it through a WLAN module, a Bluetooth module or a USB data cable.

NO TICE

● Over a WLAN module: The USB-Adapter2000-C WLAN module is supported.
● Over a Bluetooth module: The USB-Adapter2000-B Bluetooth module is

supported.

● Over a USB data cable: The USB 2.0 port is supported. Use the USB data cable

delivered with the mobile phone.

● Mobile phone operating system: Android 4.0 or later.
● Recommended phone brands: Huawei and Samsung.

SUN2000-(196KTL-H0, 200KTL-H2, 215KTL-H0)

Series

User Manual

7 Man-Machine Interactions

Issue 07 (2021-07-08)

Summary of Contents for 196KTL-H0



























































































































Search results

Summary of Contents for 196KTL-H0

Reviews:

Related manuals for 196KTL-H0

Brands by name

Popular brands

Huawei 196KTL-H0, User Manual

Search results

Summary of Contents for 196KTL-H0

Reviews:

Related manuals for 196KTL-H0

Brands by name

Popular brands