Huawei 196KTL-H0 User Manual Download Page 29

Page: 29 / 122

500 meters from the coast or prone to sea breeze. The regions prone to sea

breeze vary with weather conditions (such as typhoons and monsoons) or

terrains (such as dams and hills).

Mounting Structure Requirements

●

The mounting structure where the inverter is installed must be fire resistant.

●

Do not install the inverter on flammable building materials.

●

The inverter is heavy. Ensure that the installation surface is solid enough to

bear the weight load.

●

In residential areas, do not install the inverter on drywalls or walls made of

similar materials which have a weak sound insulation performance because

the noise generated by the inverter is noticeable.

Figure 4-1 Mounting structure

4.3.2 Space Requirements

●

Reserve enough clearance around the inverter and select an appropriate

installation angle to ensure sufficient space for installation and heat

dissipation.

Figure 4-2 Installation space

SUN2000-(196KTL-H0, 200KTL-H2, 215KTL-H0)

Series

User Manual

4 Installation

Issue 07 (2021-07-08)

Summary of Contents for 196KTL-H0



























































































































Search results

Summary of Contents for 196KTL-H0

Reviews:

Related manuals for 196KTL-H0

Brands by name

Popular brands

Huawei 196KTL-H0, User Manual

Search results

Summary of Contents for 196KTL-H0

Reviews:

Related manuals for 196KTL-H0

Brands by name

Popular brands