Huawei 196KTL-H0 User Manual Download Page 86

Page: 86 / 122

Table 7-1 LED indicator description

LED Indicator

Status

Meaning

Green off

There is no operation

with a USB flash drive.

Blinking green slowly

There is an operation

with a USB flash drive.

Blinking green fast

An operation with a

USB flash drive has

failed.

Steady green

An operation with a

USB flash drive is

successful.

5. Insert the USB flash drive into a computer and check the exported data.

NO TE

When the configuration export is complete, the boot script file and exported file are in

the root directory of the USB flash drive.

7.2.2 Importing Configurations

Prerequisites

A complete configuration file has been exported.

Procedure

1. Click Local maintenance script on the app to generate a boot script file, see

the

FusionSolar APP and SUN2000 APP User Manual

2. Import the boot script file to a PC.
3. Replace the exported boot script file in the root directory of the USB flash

drive with the imported one.

NO TICE

Replace the boot script file only and keep the exported files.

4. Connect the USB flash drive to the USB port. The system automatically

identifies the USB flash drive and executes all commands specified in the boot

script file. View the LED indicator to determine the operating status.

SUN2000-(196KTL-H0, 200KTL-H2, 215KTL-H0)

Series

User Manual

7 Man-Machine Interactions

Issue 07 (2021-07-08)

Summary of Contents for 196KTL-H0



























































































































Search results

Summary of Contents for 196KTL-H0

Reviews:

Related manuals for 196KTL-H0

Brands by name

Popular brands

Huawei 196KTL-H0, User Manual

Search results

Summary of Contents for 196KTL-H0

Reviews:

Related manuals for 196KTL-H0

Brands by name

Popular brands