118
Function Keys Features
Settings
You can only configure the codec by Web interface.
To configure multicast codec key via Web interface
1. Click Directory ->Multicast Paging:
2. Select the desired codec from the pull-down list of Multicast Codec
3. Click the
button to save the configuration.
To configure multicast listening addresses via Web interface:
1. Click Directory->Multicast Paging
。
2. Select the desired value from the pull-down list of Paging Barge.
3. Select the desired value from the pull-down list of Paging Priority Active.
4. Enter the multicast IP address(es) and port number (e.g., 224.5.6.20:2000) which the
phone listens to for incoming RTP multicast in the Listening Address field.
5. Enter the label in the Label field.
6. Click
button to save the configuration.
Note:
The priorities of listening to multicasting addresses can be predefined: 1 being the
highest priority, 10 with the lowest in priority order. Both the multicast paging
sender and receiver’s phones play a warning tone when establishing a multicast
paging call. Listening to Multicasting addresses can be configurable via Web
interface only.
