Htek UC912E User Manual Download Page 78

Page: 78 / 136

Basic Call Features

3. Enter the Forward To number.

4. Press

or Save soft key to save the configuration.

To configure no answer forward

No Answer Forward: Incoming calls are forwarded if not answered after sometime.

1. Press Menu →Features → Call Forward →No Answer Forward.

2. Press

and

or press Info/Switch soft key to select the enable choice

3. Enter the Forward To number and After Ring Times.

4. Press

or Save soft key to save the configuration.

When the Forward feature is enabled, the Forward Icon will display on Top of the

LCD.

To configure Forward via Web interface

1. Setting → Features

2. Click On for the Always/Busy/No Answer

3. Fill the Forward to Number

4. Fill the After Ring Time

5. Click

to save the configuration

Summary of Contents for UC912E









































































































































Search results

Summary of Contents for UC912E

Reviews:

Related manuals for UC912E

Brands by name

Popular brands

Htek UC912E, User Manual

Search results

Summary of Contents for UC912E

Reviews:

Related manuals for UC912E

Brands by name

Popular brands