Basic Features Configuration
38
1. Click Network→ Basic→ Internet Port
2. Select IPv4 for Internet Port
3. Click
for the setting.
To configure DHCP via Phone interface:
1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN
Port→ IPv4→ DHCP mode.
2. Click Save and restart the phone.
To configure a static IP address via Phone interface:
1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN
Port → IPv4 → Static mode.
2. Enter the parameters: IP, Netmask, Gateway, Pri.DNS(primary DNS), Sec.DNS
(secondary DNS) in the corresponding fields.
3. Click Save and restart the phone.
4. Press the Save soft key to accept the change or the Cancel soft key to cancel. If you
are using an xDSL modem, you can connect your phone to the Internet via PPPoE
mode. You can set a WAN port to be a PPPoE port. The PPPoE port will perform a
PPP negotiation to obtain the IP address. Contact your system administrator for the
PPPoE user name and password.
To configure PPPoE via Phone interface:
1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN
Port → PPPoE mode.
