HTC RHOD400, User Manual

Page: 209 / 234

Section 3E. Sprint Worldwide Wireless Service 199
Sprint Worldwide Wireless Ser
vice
Services
Caller ID
Caller ID displays the number (and name, if in your PhoneBook) of incoming calls. Caller ID in GSM mode
must be enabled by the user.
To enable or disable caller ID:
1.
Tap Start > Settings > All Settings .
2.
Tap the Personal tab and then tap Phone > GSM/UMTS Services tab.
3.
Tap Caller ID and then tap Get Settings .
4.
Select Everyone , No one , or Only to contacts and tap ok .
Call Waiting
Call Waiting notifies you of an incoming call even while you’re in a call. You can then accept, reject, or ignore
the incoming call. Unlike Call Waiting in CDMA mode, Call Waiting in GSM mode must first be activated.
To use Call Waiting Internationally:
1. Tap
Start > Settings > All Settings
.
2. Tap the
Personal
tab and then tap
Phone > GSM/UMTS Services
tab.
3. Tap
Call Waiting
and then tap
Get Settings
.
4. Select the
Notify me
option and tap
ok
.
Voicemail and Text Messages
To activate voicemail settings:
1.
Tap Start > Settings > All Settings .
2.
Tap the Personal tab and then tap Phone > GSM/UMTS Services tab.
3.
Tap Voice Mail and Text Messages and then tap Get Settings .
4.
The text messages service center number and your voicemail number are then displayed. To change the
voicemail number, open the sliding QWERTY keyboard or an onscreen keyboard, and then use the
keyboard to enter a new number.
5.
Tap ok .
Note The voicemail number is automatically set up when you receive your device. You will probably not need to change
it unless otherwise instructed by your carrier.