HSM VK 5012, Operating Manual

Page: 58 / 96

6.417.999.120
Installation VK 5012
Issued 06/2005
5.30
5.8 End of wire
The passage of the wires through the machine is monitored by proximity switches
(1) in the wire station. If no more wire runs past one of the proximity switches, the
error message • END OF WIRE • appears in the display.
The press stops in the initial position and switches to
“Manual mode”.
- Put in a new wire coil and remove the tying wire.
- Pull the beginning of the wire out of the core of the coil and thread it through the
wire brake and guides to position A.
- Join the ends of the old and new wires.
;;
;;
;;
;; ; ; ; ; ; ; ; ; ; ; ;
;;
;; ; ; ; ; ; ;
A
;;
;;
;;
;; ; ; ; ; ; ; ; ; ; ; ;
;;
;; ; ; ; ; ; ;
1
1