HSM VK 5012, Operating Manual

Page: 41 / 96

6.417.999.120
VK 5012 Installation
Issued 06/2005
5.13
Betriebsart
Operating mode
Not-Aus
Emergency-off
Umreifen
Strapping
Zuführband
Feeding
conveyor
Ballen fertig
Bale ready
Ballenlänge
Bale length
Handbetrieb
Manual operation
0 0 0 0 1
Display
SIEMENS COROS OP 17
Automatikbetrieb
Automatic operation
Einrichten
Setup
1
2
3 4 5 6
7
8
9
Pause Zuführband
Pause feeding
conveyor
Lampentest
Lamp check
Motor
Betriebsbereit
Ready for operation
K1 K2 K3 K4 K5 K6 K7 K8
K9 K10 K11 K12 K13 K14 K15 K16
○○○○○
○
○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
5.3 Operating modes
5.3.1 Set-up mode
Caution!
In this operating mode certain electrical safety functions are disabled.
Only specially trained staff may operate the machine in Set-up mode.
The key must always be removed.
Turn the key-operated
“Set-up”
switch to the I position.
Individual movements of the machine can be actuated step-by-step by pressing the
function buttons on the auxiliary operating panel.
Preconditions:
- all motors are off
- none of the solenoid valves are activated