2-25
Racing Kit
Air Funnel Replacement (2008 Model Kit)
The 2008 air funnel kit must be used with 2008 model ECU.
1. Remove the standard air cleaner element and air funnels.
2. For racing kit air funnel installation, modify the air cleaner element retainers (both ends) as shown.
3. Install the modified retainers and tighten the screws.
4. Install the racing kit air funnels into their proper location according to each identification mark on the funnel.
5. Install the lock washers, tongued washers and screws, then tighten the screws securely.
6. Bend the tabs of the lock washer and lock the screws.
7. Install the racing kit air cleaner element and tighten the screws.
Air cleaner elements
(racing kit)
Air funnel (#4)
(racing kit)
Air funnel (#1)
(racing kit)
Air funnel (#2)
(racing kit)
Air funnel (#3)
(racing kit)
Tongued
washers
(racing kit)
Lock washers (racing kit)
Retainer (standard;
need modify)
Retainer (standard;
need modify)
Retainer (standard)
Retainer modification
Grind off this portion
Do not grind this
portion (both sides)
r=5.9 mm
#1
#2
#3
#4
