Racing Kit
2-14
Secondary Air Supply System Removal
1. Disconnect the secondary air supply hoses from the cylinder head reed valve covers and air cleaner housing.
2. Cut 35 mm from each end of the cylinder head reed valve cover side and air cleaner housing side of the removed hoses..
3. Install the hoses to the cylinder head reed valve covers and air cleaner housing, then secure them with removed clips.
4. Plug the hoses with cone plugs from the racing kit, and secure them with clamps also in the racing kit (air cleaner side cone plug: ø15 mm, reed valve cover side
cone plug: ø14 mm).
Cone plug, ø15 mm
(racing kit)
Clamp
(racing kit)
Clamp
(racing kit)
Cone plug, ø14 mm
(racing kit)
Remove
them
Remove
them
35 mm
Remove
them
Cone plug, ø14 mm
(racing kit)
Clamp
(racing kit)
35 mm
35 mm
