Racing Kit
2-8
Standard
Racing kit
Gear ratio (T= Teeth)
Gear ratio (T= Teeth)
1st
2.750 (12/33T)
2.600 (15/39T)
2nd
2.000 (16/32T)
3rd
1.667 (18/30T)
4th
1.444 (18/26T)
5th
1.304 (23/30T)
6th
1.208 (24/29T)
Transmission Set Installation
1. Remove and disassemble the transmission.
2. Assemble the transmission using the racing kit mainshaft and C1 gear.
• When disassembling, always replace the circlips with new ones.
• Always install the thrust washer and snap ring with the chamfered (rolled)
edge facing away from the thrust load as shown.
Check the gear dog edges for wear.
Service limit: 1.0 mm (0.04 in)
Gear jumps may occur if the gear
dog edges are worn. Replace gears
worn to the service limit with new
gears.
