2-33
Racing Kit
(1) FORK SPRING (2) SPRING COLLAR
(3) SPRING SEAT STOPPER
(4) SPRING COLLAR B
Remove the following:
– Spring collar B
– Spring seat stopper
– Spring collar
– Fork spring
The following optional fork springs are available.
(1) DAMPER ROD FLAT PORTION
(2) PRE-LOAD ADJUSTER (3) FORK BOLT
(1) PRE-LOAD ADJUSTER
(1) FORK BOLT (2) O-RING
Fork Spring Replacement
Make sure that the pre-load adjuster is in the softest
position by turning the adjuster counterclockwise.
Remove the fork bolt from the fork slider.
Push the fork slider slowly down, and gently seat the
dust seal onto the axle holder.
Insert a 17 mm spanner between the spring seat
stopper, and hold the damper rod.
Remove the fork bolt.
(1)
(1)
(2)
(1)
(3)
(2)
Part number
Spring rate
Oil level
51401-NEE-R21
0.95 kgf/mm (STD)
120 mm
51401-NL3-921
0.90 kgf/mm
115 mm
51402-NL3-921
1.0 kgf/mm
125 mm
51403-NL3-921
1.05 kgf/mm
130 mm
Optional springs are identified by the spring rate let-
ter on the spring end as shown (standard spring has
no letter).
(4)
SPRING RATE LETTER
(2)
(3)
(1)
