2-38
Racing Kit
(2)
(1)
(3)
(1) LOWER JOINT
(2) LOCK NUT
(3) SHOCK ABSORBER LENGTH
Vehicle Height Adjustment
To adjust the vehicle height, loosen the rear shock
absorber lower joint lock nut, turning the lower
joint.
Standard shock absorber length: 296 mm (11.7 in)
Adjustable range: 294 – 302 mm (11.6 – 12.0 in)
Do not adjust the shock absorber length out of the
range.
(1) PRE-LOAD ADJUSTING KNOB
Rear Suspension Setting
Pre-load Adjuster
Spring pre-load can be adjusted by turning the pre-
load adjuster knob.
Turn the adjuster clockwise to increase the spring
pre-load.
Turn the adjuster counterclockwise to decrease the
spring pre-load.
Standard position: 10 turns from full soft (5 mm)
The spring pre-load is already 5 mm when installing
the spring to the shock absorber. The adjustment is
started from this position.
(1) COMPRESSION DAMPING ADJUSTER (Lo)
(2) COMPRESSION DAMPING ADJUSTER (Hi)
Hi-speed Compression Damping Adjuster
Turn the hi-speed compression damping adjuster
counterclockwise until it stops (full soft position),
then turn the adjuster clockwise.
Standard position: 1 turn in from full soft
Low-speed Compression Damping Adjuster
Turn the low-speed compression damping adjuster
clockwise until it stops (full hard position), then turn
the adjuster counterclockwise.
Standard position: 15 clicks out from full hard
(2)
(1)
(1)
(2)
