2-11
Racing Kit
When using a lock nut wrench for adjusting a bolt
lock nut, use a deflecting beam type torque wrench
20 inches long. The lock nut wrench increases the
torque wrench’s leverage, so the torque wrench
reading will be less than the torque actually applied
to the lock nut. The specification given is the actual
torque applied to the lock nut, not the reading on the
torque wrench. Do not overtighten the lock nut.
Apply molybdenum disulfide grease to the all
mounting bolt threads and seating surface of the
nuts.
Install and tighten the engine hanger bolts as fol-
lows.
1. Install the point C and point D engine hanger
adjusting bolts from the inside of the frame.
2. Install the engine into the frame.
3. Install the rear lower engine hanger bolt (D) from
the right side and align the flat surface between
the adjusting bolt and hanger bolt.
4. Install the point rear upper (C) engine hanger
distance collars. Install the rear upper engine
hanger bolt (C) from the right side and align the
flat surface between the adjusting bolt and hang-
er bolt.
5. Install the right and left front hanger (A) distance
collars and hanger bolts.
6. Tighten the rear lower hanger adjusting bolt
while turning the hanger bolt until it seats.
7. Tighten the rear lower engine hanger adjusting
bolt (D) to the specified torque.
Torque: 10 N•m (1.0 kgf•m, 7 lbf•ft)
A
C
D
8. Tighten the rear lower engine hanger adjusting
bolt lock nut (D) to the specified torque.
Tool:
Lock nut wrench, 5.8 x 46 mm
07VMA-MBB0100 or 07VMA-MBB0101
Torque:
Actual:
54 N•m (5.5 kgf•m, 40 lbf•ft)
Scale reading:
49 N•m (5.0 kgf•m, 36 lbf•ft)
9. Install the rear lower engine hanger nut (D), then
tighten the nut to the specified torque while
holding the hanger bolt.
Torque: 59 N•m (6.0 kgf•m, 43 lbf•ft)
10. Tighten the rear upper engine hanger adjusting
bolt (C) to the specified torque.
Torque: 10 N•m (1.0 kgf•m, 7 lbf•ft)
11. Tighten the rear upper engine hanger adjusting
bolt lock nut (C) to the specified torque.
Tool:
Lock nut wrench, 5.8 x 46 mm
07VMA-MBB0100 or 07VMA-MBB0101
Torque:
Actual:
54 N•m (5.5 kgf•m, 40 lbf•ft)
Scale reading:
49 N•m (5.0 kgf•m, 36 lbf•ft)
12. Install the rear upper engine hanger nut (C), then
tighten the nut to the specified torque while
holding the hanger bolt.
Torque: 59 N•m (6.0 kgf•m, 43 lbf•ft)
13. Tighten the left side front engine hanger bolt (A)
to the specified torque.
Torque: 59 N•m (6.0 kgf•m, 43 lbf•ft)
14. Tighten the right side front engine hanger bolt
(A) to the specified torque.
Torque: 59 N•m (6.0 kgf•m, 43 lbf•ft)
Install the removed parts in the reverse order of
removal.
