Shenzhen Hpmont Technology Co., Ltd.
Chapter 6 Function Introduction
HD5L Series Controller User Manual V1.4
―
67
―
6.2.13
F12: Digital I/O Terminal Parameters
Ref. Code
Function Description
Setting Range [Default]
F12.00
Input terminal filter time
0.000 - 1.000 [0.010s]
Defines filter time of digital input termianl and to set input terminal sensibility.
•
The input terminals are susceptible to interference which will result in misoperation, so F12.00 can be
increased.But too long filter time will affect sensibility.
F12.01 DI1
function
000 - 134 [1]
F12.02 DI2
function
000 - 134 [2]
F12.03 DI3
function
000 - 134 [3]
F12.04 DI4
function
000 - 134 [4]
F12.05 DI5
function
000 - 134 [5]
F12.06 DI6
function
000 - 134 [6]
F12.07
DI7 (I/O board) function
000 - 134 [0]
F12.08
DI8 (I/O board) function
000 - 134 [0]
F12.09
DI9 (I/O board) function
000 - 134 [0]
F12.10
DI10 (I/O board) function
000 - 134 [0]
F12.11
DI11 (I/O board) function
000 - 134 [0]
F12.12
DI12 (I/O board) function
000 - 134 [0]
Note: Hundred digit = 0, normally open input selected; = 1, normally closed input selected.
0: Unused. Terminal function is unused. HD5L ignores the signal input via this terminal.
•
The unused terminal is recommended to be set as 0 so as to avoid wrong connection or action.
1: Controller enabled. (EN)
•
When enabled, HD5L is enabled to run;
•
When unused, HD5L is unused to run and will be in coasts to stop status.
•
When no terminal selects this function, it defaults that HD5L is at enabled status.
2, 3: UP / DN.
•
Set control terminal to control up and down of elevator. The terminals are in below table.
UP Terminal
DN Terminal
Selection
0 0 Stop
0 1 Down
1 0 Up
1 1 Stop
123
4 - 6: MS1 - MS3.
•
Achieve 8-speed running curve via terminals logic combination, as follow table.
MS3 Terminal
MS2 Terminal
MS1 Terminal
Multi-speed setting
0 0 0 Multi-speed
0
(F05.00)
0 0 1 Multi-speed
1
(F05.01)
0 1 0 Multi-speed
2
(F05.02)
0 1 1 Multi-speed
3
(F05.03)
1 0 0 Multi-speed
4
(F05.04)
1 0 1 Multi-speed
5
(F05.05)
1 1 0 Multi-speed
6
(F05.06)
1 1 1 Multi-speed
7
(F05.07)
6