Chapter 6 Function Introduction
Shenzhen Hpmont Technology Co., Ltd.
―
34
―
HD31 Series User Manual V1.1
Ref. Code
Function Description
Setting Range [Default]
F05.16
Min. setting corresponding value of polyline
0.0 - 100.0 [0.0%]
F05.01 - F05.04 define line 1. F05.05 - F05.08 define line 2. F05.09 - F05.16 define the polyline.
•
Line 1, line 2 and the polyline can independently achieve positive and negative characteristics as shown
in following figure.
•
If the curve min. setting is the same as max. setting, it is a line. The default frequency is the corresponding
frequency of the curve min. setting.
In the figure:
•
P / A is terminal pulse / analogue setting.
•
Pulse frequency (P) is 100% corresponding to F16.17 max. input pulse frequency.
•
Analogue input (A) is 100% corresponding to 10V or 20mA.
F05.17
Skip frequency 1
F00.09 - upper limit [0.00Hz]
F05.18 Skip
frequency
2
F05.19 Skip
frequency
3
F05.20
Range of skip frequency
0.00 - 30.00 [0.00Hz]
The setting of skip frequency is for output frequency of HD31 to avoid resonance with the load.
•
HD31 will skip the above frequencies as shown in
figure. Up to 3 skip frequency ranges can be set.
•
During the process of Acc / Dec, HD31 will run with
countinous frequency output, ignoring the skip
frequency ranges. But HD31 will not run at
constant speed in the skip frequency ranges.
•
Frequency setting is uncontinuous, while
frequency output is continuous.
F05.01
F05.05
F05.03
F05.07
F05.04
F05.08
F05.02
F05.06
Setting
corresponding value
F05.01
F05.05
F05.03
F05.07
F05.02
F05.06
F05.04
F05.08
Setting
corresponding value
Positive and negative characteristic of line
P/A(setting)
P/A(setting)
F05.15
F05.10
F05.12
F05.14
F05.16
F05.16
F05.14
F05.12
F05.10
F05.13 F05.11 F05.09
F05.15 F05.13 F05.11 F05.09
Positive and negative characteristic of polyline
Setting corresponding value
Setting corresponding value
P/A(setting)
P/A(setting)
Inflection point 2
Inflection point 2
Inflection point 1
Inflection point 1
Setting frequency after calculated
Skip range
Setting frequency
F05.19
F05.18
F05.17