Removing a DIMM
1.
Disconnect power from the workstation (see
Predisassembly procedures on page 77
).
CAUTION:
To ensure that DIMMs are not damaged during removal or installation, power off
the workstation and unplug the power cord from the AC power outlet. If you do not unplug the
power cord before installing memory, the modules might be damaged and the workstation will not
recognize the memory changes.
2.
Remove the side access panel (see
Removing the side access panel on page 79
).
3.
Remove the airflow guide (
Removing the airflow guide on page 80
).
4.
Remove the memory fans (see
Removing the memory fans on page 155
).
5.
Carefully push outward on the memory slot socket levers (1). Lift the DIMM straight up and out of
its socket (2), as shown in the following figure.
Store the DIMM in an anti-static bag.
Figure 5-88
Removing a DIMM
160
Chapter 5 Replacing components
ENWW