Overview 10
Quick installation and setup overview
1.
Install the UPS Network Module ("
Installing the UPS Network Module
" on page
12
) and configure the
network settings ("
Configuring the UPS Network Module network settings
" on page
15
).
2.
Access the web interface.
3.
Configure the power fail settings using the Shutdown Parameters screen (on page
35
).
4.
(optional) Configure additional settings using the menus under Settings (on page
30
).
5.
Install and configure the HPPP Client on all servers to be protected by the UPS. After all Clients are
configured at the servers, they are automatically added by the UPS Network Module and appear on the
Notified Applications screen (on page
40
).
For more information, see the
HP Power Protector User Guide
on the HP website
(
http://www.hp.com/go/rackandpower
).
Summary of Contents for UPS Network Module
Page 60: ...Firewall configuration 60 13 Click Change scope to add more security to the port exception ...
Page 63: ...Firewall configuration 63 ...
Page 68: ...Alert messages 68 UPS Site Wiring Fault UPS Site Wiring Fault Cleared ...
Page 82: ...Regulatory compliance notices 82 Class B equipment BSMI notice ...
