Firewall configuration 56
Firewall configuration
Configuring the firewall on Windows
NOTE:
For other operating systems, see the operating system documents on enabling or
disabling ports on the firewall.
Windows Firewall blocks most communication through unused IP ports. This prevents a server with the HPPP
Client installed from using the following four ports to communicate with the UPS Network Module:
•
4679/UDP (Client)
•
4680/UDP (Client)
•
5000/TCP (Alarms)
•
5001/TCP (Alarms)
To configure the Windows XP with Service Pack 2 Firewall to make an exception for ports 4679, 4680,
5000, and 5001:
1.
Click
Start
, select
Control Panel
, and then double-click
Network Connections
. The Network Connections
screen appears.
2.
Right-click the network connection where you are configuring the firewall, and then select
Properties
.
The Properties screen appears.
Summary of Contents for UPS Network Module
Page 60: ...Firewall configuration 60 13 Click Change scope to add more security to the port exception ...
Page 63: ...Firewall configuration 63 ...
Page 68: ...Alert messages 68 UPS Site Wiring Fault UPS Site Wiring Fault Cleared ...
Page 82: ...Regulatory compliance notices 82 Class B equipment BSMI notice ...
