HP UPS Network Module User Manual Download Page 25

Page: 25 / 88

HP UPS Network Module web interface 25

Manual Control screen

Click

Manual Control

in the menu tree to display the Manual Control screen. This screen allows an

administrator to execute shutdown and restart sequences for the UPS and its controlled load segments. To

prevent data loss, configure the time required to shut down each registered server using the Shutdown
Parameters screen (on page

The status of each load segment is indicated by an icon. A green icon (

) indicates that the load segment

is on. A red icon (

) indicates that the load segment is off. A gray icon (

) indicates that the load

segment status is unknown.

IMPORTANT:

The UPS has priority over the controlled load segments. Shutting down the UPS

causes the load segments to shut down. Controlled load segments can only be restarted if the UPS

is on.

Only users with administrator privileges can save command parameters and execute commands. To

configure a command:

Select the command you want to run in the Control pull-down menu. Configured commands will not
initiate until you click

Execute

Safe power down

—A shutdown sequence for the load segment is launched immediately.

Connected equipment powers off, and then the load segment powers off.

Safe power down & reboot

—A sequence containing a shutdown command followed by a restart

command for the load segment is launched immediately. Connected equipment powers off, and

then the load segment powers off. The load segment restarts when the Toggle Duration time is

reached.

Immediate On

—A restart sequence for the load segment is launched immediately. The load segment

powers on, and then connected equipment powers on.

Delayed, safe power down

—A shutdown sequence for the load segment is launched when the Off

Delay time is reached. Connected equipment powers off, and then the load segment powers off.

Summary of Contents for UPS Network Module

























































































Search results

Summary of Contents for UPS Network Module

Reviews:

Related manuals for UPS Network Module

Brands by name

Popular brands

HP UPS Network Module, User Manual

Search results

Summary of Contents for UPS Network Module

Reviews:

Related manuals for UPS Network Module

Brands by name

Popular brands