HP Surestore Tape Library Model 2/28, User Manual

Page: 84 / 110

4-40
Library Operation
Using Online Repair
Using Online Repair
1 2
➞
ADMIN*
➞
PSWD 000 000 000
➞
ONLINE REPAIR
Online repair is a feature that allows:
• Authorized service representatives to replace a faulty drive while the
library is active.
• Users to clear a drive cleaning error when the tape in the drive may be
damaged.
Under normal conditions, this option should only be used by an HP qualified
authorized service representative. However if an older, frequently-used tape
causes a drive cleaning message to be displayed more than once and the
administrator suspect the tape is damaged, the Online Repair option can be
used to clear the drive error message so the administrator can attempt to
recover data from the damaged tape.
CAUTION The library drive mechanism(s) are inactive while this option is in use.
To use this option to clear a drive cleaning error:
1. With
CLEAN DRV #
displayed, press
CANCEL
until the drive status
displays. (# is the drive number containing the damaged tape.)
2. Press
NEXT
until
ADMIN*
displays, then press
ENTER
.
3. Enter the three-part numerical password (see “Entering the
Administration Menu Password” on page 4-7).
4.
INFO*
displays. Press
NEXT
or
PREV
until
ONLINE REPAIR*
displays,
then press
ENTER
.
DRIVE POWER*
displays.
5. Press
NEXT
or
PREV
until
DRIVE STATUS
displays, then press
ENTER
.
DRV
1 ON GOOD
displays.
• If the damaged tape is in drive 1, press
ENTER
.
• If the damaged tape is in drive 2, press
NEXT
until
DRV 2 ON GOOD
displays, then press
ENTER
.
DRV # ON GOOD
displays, where “#” is the drive number and
ON GOOD
is flashing.