Adding targets to the QLogic iSCSI initiator
To add HBA port targets:
1.
Click the green plus sign (
Figure 84 (page 93)
).
2.
Enter the first iSCSI target port IP address.
Figure 84 HBA Port Target Configuration window
3.
Repeat steps 1 and 2 for each MPX200 you want to add.
4.
Click
Next
.
5.
To activate the changes, enter the SMS password:
config
.
6.
Select the
Target Settings
tab. Verify that the HBA state is Ready, Link Up and that each target
entry state is Session Active (
Figure 85 (page 93)
).
Figure 85 Target Settings tab
Setting up the iSCSI initiator
93
