# To set a discovery session CHAP username and password for the initiator
# authentication by the target(s), uncomment the following lines:
#discovery.sendtargets.auth.username = username
discovery.sendtargets.auth.username = iqn.1994-05.com.redhat:fc813cac13.sanergy3
3
#discovery.sendtargets.auth.password = password
discovery.sendtargets.auth.password = CHAPSecret01
# To set a discovery session CHAP username and password for target(s)
# authentication by the initiator, uncomment the following lines:
#discovery.sendtargets.auth.username_in = username_in
#discovery.sendtargets.auth.password_in = password_in
Enabling single-direction CHAP during discovery session and bidirectional CHAP
during normal session
Table 16 (page 102)
lists the settings you use to enable single-direction CHAP during a discovery
session and bidirectional CHAP during a normal session.
Table 16 CHAP single-direction settings
Microsoft initiator secret settings
MPX200 secret settings
Setting (example)
Action
Setting (example)
Source
hpstorageworks
General Tab Secret
N/A
iSCSI Port
CHAPsecret0
Add Target Portal
CHAPsecret01
Discovered iSCSI
Initiator
CHAPsecret01
Log on to Target
hpstorageworks
iSCSI Presented
Target
NOTE:
These are examples of secret settings. Configure CHAP using settings that apply to your network environment.
1.
Enable CHAP for the MPX200 discovered iSCSI initiator entry (CHAP can be enabled via CLI
only).
a.
If the iSCSI initiator is not listed under the
set chap
command, do one of the following:
•
From HP P6000 Command View, select
Hosts
, and then select the
Add Host
tab.
Enter the IQN name string.
•
From the CLI, use the
add
command to add the iSCSI initiator that will perform the
discovery.
b.
If the iSCSI initiator is listed when you execute the
set chap
command, then enable
CHAP secret (for example:
CHAPsecret01
).
•
Select the index of the iSCSI initiator.
•
Enable CHAP by selecting 0, and then entering the CHAP secret.
2.
Enable CHAP for the MPX200 iSCSI presented target:
a.
Enter the
set chap
command.
b.
Select the Presented Target the initiator will log in to.
c.
Enable CHAP and enter a CHAP secret. For example:
hpstorageworks
102 MPX200 iSCSI configuration rules and guidelines
