Figure 127 iSCSI controller properties
Issues and solutions
HP P6000 Command View does not discover MPX200
Solution 1:
Ensure that a DHCP server is available.
Solution 2:
Use the CLI to set a static IP address on each MPX200 blade.
Solution 3:
Ensure that the HP P6000 Command View station is on the same subnet as the
management ports.
Solution 4:
Enter the known IP address of the management port of the iSCSI controller in the HP
P6000 Command View discovery screen.
Initiator cannot log in to MPX200 iSCSI target
Solution 1:
Ensure that you are using the correct iSCSI port IP address.
Solution 2:
In HP P6000 Command View, for each controller, click the
IP ports
tab, and verify the
IP Address settings (
Figure 128 (page 148)
).
Issues and solutions
147
