Figure 43 The
set mgmt
command.
Setting up the iSCSI ports
The iSCSI ports require an IP address. Use the
set iscsi
command (see
Figure 44 (page 47)
).
Figure 44 The
set iscsi
command
Fibre Channel zoning
See
“Fibre Channel zoning” (page 31)
and
“Fibre Channel switch-based zoning” (page 32)
for
zoning information.
WWNs used in zoning can be found in the MPX200 using the
show vpgroup
s command (see
Figure 45 (page 48)
).
Setting up the iSCSI ports
47
