HP StorageWorks 2/16 - SAN Switch Manual Download

Page: 73 / 250

Fabric OS 3.x Document Addendum

Zoning version user guide

This chapter contains updates to the HP StorageWorks Zoning Version 3.1.x/4.1.x User Guide,
part number AA-RS26C-TE.

On original page 17, under the heading “License Activation Using Web Tools,” replace

the following text:

6. Enter the license key in the License Key field and click Add. The feature is now activated.

With this text:

6. Click Add.

7. Enter the license key in the License Key field and click Add License. The feature is now

activated.

On original page 26, under the heading “Commands to Open a Transaction,” add the

following rows to the list:

zoneObjectCopy

Copy a zone object.

zoneObjectExpunge

Delete a zone object and remove it from member lists of other zone
objects.

zoneObjectRename

Rename a zone object.

Summary of Contents for StorageWorks 2/16 - SAN Switch



























































































































































































































































Search results

Summary of Contents for StorageWorks 2/16 - SAN Switch

Reviews:

Related manuals for StorageWorks 2/16 - SAN Switch

Brands by name

Popular brands

HP StorageWorks 2/16 - SAN Switch, Manual

Search results

Summary of Contents for StorageWorks 2/16 - SAN Switch

Reviews:

Related manuals for StorageWorks 2/16 - SAN Switch

Brands by name

Popular brands