INSTRUCTIONS CM665
© Panduit Corp. 2013
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
Front of Cabinet
N
ET
-A
CCESS
N-Type Switch Cabinets
(NACSS, NERSS Slack Spool Kits)
Install Slack Spool Brackets
•
NACSS
- Locate mounting position for Center Bracket Assembly. Loosen adjusting screws on
bracket and adjust bracket width to allow for tight fit between [2] ganged cabinets and tighten adjusting
screws, if necessary. Secure Center Bracket Assembly to cabinet posts with [4] M5 Torx screws.
•
NERSS
- Locate mounting positions for Left and Right End of Row Brackets. Secure Left and Right
End of Row Brackets to cabinet posts with [2] M5 Torx screws per bracket.
[2] M5 Torx Screws
(use T25 Torx bit)
NACSS
- Center Slack Spool Bracket
Page 1 of 2
[2] M5 Torx Screws
(use T25 Torx bit)
NERSS
- Right Slack Spool Bracket
NERSS
- Left Slack Spool Bracket
[2] M5 Torx Screws
(use T25 Torx bit)
[2] M5 Adjustment Screws
(use T25 Torx bit)
