HP StorageWorks 2/16 - SAN Switch, Manual

Page: 78 / 250

Diagnostic and system error messages reference guide
78 Fabric OS 3.x Document Addendum
AUTH-AUTHERROR
Message
Probable Cause
An ERROR-level authentication failure occurred. The
text message
displays more
information about the failure that occurred.
General authentication errors:
■
Authentication is rejected because the other side does not support authentication or a
required protocol.
■
Internal error due to data mismatch or corruption.
■
Various error types that relate to authentication configuration file such as empty file,
corruption file, or nonexistent file.
■
Failed to get information for authentication entry such as port or switch.
■
Failed to get security license.
■
Failed to validate switch or port name.
■
Disabled port due to unauthorized switch that is not configured in the SCC policy.
Specific FCAP/SLAP authentication errors:
■
Failed to retrieve switch certificate.
■
Failed to sign data for FCAP/SLAP authentication messages.
■
Incorrect length or content in the FCAP/SLAP authentication payload, such as nonce
length, signature length, or certificate length.
■
Failed to verify different types of authentication messages (for example, certificate,
nonce, or signature data) for FCAP/SLAP authentication protocol.
Specific DH-CHAP authentication errors:
■
Failed to update/remove secret database when using
secAuthSecret
command.
■
Failed to retrieve secret value.
■
Failed to generate various values for DH-CHAP authentication messages, such as DH
group, hash value, challenge message, or response value.
■
Incorrect length or content in the authentication payload, such as challenge length, DH
group length, hash list length, or response length.
■
Failed to verify different types of authentication messages (for example, reply or
success) for DH-CHAP authentication protocol.
Recommended Action
For a security license error, make sure that the security license is properly installed, using the
licenseshow
command. Reinstall the license, if necessary, using the
licenseadd
command.
<timestamp>
ERROR AUTH-AUTHERROR, 2, <text message>