HP StorageWorks 2/16 - SAN Switch, Manual

Page: 148 / 250

Fabric OS procedures user guide
148 Fabric OS 3.x Document Addendum
To modify the options for configuring SNMP MIB traps, issue the
snmpmibcapset
command, as in the following example:
The following notes apply to the
snmpmibcapset
command parameters for FA-TRAP:
■
connUnitStatusChange indicates that the overall status of the connectivity unit has
changed. Its variables are:
— connUnitStatus: the status of the connection unit
— connUnitState: the state of the connection unit
■
connUnitEventTrap indicates that the connectivity unit has generated an event. Its
variables are:
— connUnitEventId: the internal event ID
— connUnitEventType: the type of this event
— connUnitEventObject: used with the connUnitEventType to identify the object to
which the event refers
— connUnitEventDescr: the description of the event
■
connUnitSensorStatusChange indicates that the status of the sensor associated with the
connectivity unit has changed:
— connUnitSensorStatus: the status indicated by the sensor
■
connUnitPortStatusChange indicates that the status of the sensor associated with the
connectivity unit has changed:
— connUnitPortStatus: shows overall protocol status for the port
— connUnitPortState: shows the user-specified state of the port hardware
switch:admin> snmpmibcapset
The SNMP Mib/Trap Capability has been set to support
FE-MIB
SW-MIB
FA-MIB
SW-TRAP
FA-TRAP
FA-MIB (yes, y, no, n): [yes]
SW-TRAP (yes, y, no, n): [yes]
swFCPortScn (yes, y, no, n): [no]
swEventTrap (yes, y, no, n): [no]
swFabricWatchTrap (yes, y, no, n): [no]
swTrackChangesTrap (yes, y, no, n): [no]
FA-TRAP (yes, y, no, n): [yes]
connUnitStatusChange (yes, y, no, n): [no]
connUnitEventTrap (yes, y, no, n): [no]
connUnitSensorStatusChange (yes, y, no, n): [no]
connUnitPortStatusChange (yes, y, no, n): [no]
SW-EXTTRAP (yes, y, no, n): [no]
no change
switch:admin>